Home › Blog › Marathon Lag: How to Fix High Ping, Packet Loss and Rubber-Banding

Marathon Lag: How to Fix High Ping, Packet Loss and Rubber-Banding

Marathon lagging or stuck on high ping? Bungie's extraction shooter has no server picker, but the Connection Quality setting can keep you on local servers. How to check server status, test your connection, set up UPnP or port forwarding, and fix rubber-banding on PC, PS5 and Xbox.

Game GuidesBy PingDeals Editorial TeamOctober 22, 20267 min read
Marathon artwork

Marathon lag usually comes from one of three places: matchmaking putting you on a far-away data centre, your own connection, or server problems during busy periods. Bungie's extraction shooter doesn't let you pick a server, but it does have one setting that makes a big difference to ping, especially if you live in a region with fewer players. Here's how to use it, how to check your connection without an in-game network graph, and the fixes for rubber-banding and packet loss.

What ping is good for Marathon?

Ping How it plays
Under 50 ms Ideal: fights feel instant
50–80 ms Fine for most players
80–120 ms Close-range fights and abilities feel late
Above 120 ms You lose trades you should win

In an extraction shooter, lag costs more than one fight: if you die to a late hit, you lose what you were carrying out. That's why a steady connection matters more here than in a game where you just respawn.

Step 1: Check Bungie's server status

Before changing anything, check whether the problem is on Bungie's side:

  • @BNGServerStatus on X posts maintenance, incidents and fixes.
  • The Marathon help site lists known issues and has a network troubleshooting section.

If there's an incident, everyone lags or disconnects at once, and no setting on your side will help. Lag right after an update or at the start of a new season is also often server load.

Step 2: Set Connection Quality to prioritise local matches

This is the most important Marathon-specific setting:

  1. Open Settings.
  2. Find Connection Quality.
  3. Set it to prioritise local matches.

Bungie's explanation: with this setting, matchmaking waits longer for a nearby server before expanding to other regions. Queue times can be longer, but you're much less likely to end up on another continent.

Two things to know:

  • In a crew, the leader's setting applies. If you're grouped up, the crew leader has to change it.
  • Low-population regions feel it most. Players in Latin America, Oceania and parts of Asia have reported constant high ping, and Bungie has acknowledged routing and regional availability problems. Bungie has also adjusted regional matchmaking since launch to balance queue times and latency; it's a trade-off, because a bigger player pool can mean higher ping.

Getting fewer far-away matches

If you're in a region with fewer players, a few habits help on top of the setting:

  • Play at your region's busy hours. In the evening there are more local players, so matchmaking finds a nearby server without expanding.
  • Group with players from your region. A crew spread across continents forces someone onto a distant data centre.
  • Check the leader's setting before you queue. The crew leader's Connection Quality decides for everyone, so make sure it's set to prioritise local matches.
  • Give the queue a little longer. Cancelling and requeueing quickly doesn't help; the setting works by waiting.

Step 3: Test your connection

Marathon shows very little detailed connection information in game, so test your line from outside it. With the game running, open Command Prompt on Windows and run:

ping -t 1.1.1.1

Watch the numbers when the game lags. Spikes at the same moment point to your connection. For packet loss, run:

pathping 1.1.1.1

Loss that starts at your router or your ISP's first hops is on your side; loss that continues to the end points to the route. A ping booster's overlay also shows live ping and loss.

What you find What it means
Ping to 1.1.1.1 steady and low, game feels laggy Far-away data centre or the route to it
Ping jumps or shows loss Your connection: Wi-Fi, other traffic, router
Everyone in the match rubber-bands Server problem
Game hitches, ping steady FPS drops on your device

Step 4: Fix your home connection

Bungie recommends a wired home connection for Marathon, and its troubleshooting advice follows the same lines as for its other games.

  1. Use Ethernet. Wi-Fi is the most common cause of spikes and loss. See Wi-Fi vs Ethernet for gaming.
  2. Don't play on a mobile hotspot. Mobile connections are much less stable and usually come with strict NAT. If it's your only option, see mobile hotspot for gaming.
  3. Pause downloads and uploads on every device: launchers, console updates, cloud backups, streams and video calls.
  4. Turn on SQM or QoS on your router if other people use the connection while you play. Why: bufferbloat.
  5. Restart your router and modem, and update the router's firmware.
  6. Disconnect any VPN you don't need. It can make matchmaking think you're somewhere else.

Step 5: Set up UPnP or port forwarding, not both

Marathon, like Bungie's other games, works best with an open NAT. If several devices in your home play online, UPnP is the simplest way to keep them all working. Port forwarding works for a single device, but don't combine UPnP and manual port forwarding for the same console or PC: the two can conflict and cause connection problems.

Step 6: Rule out FPS drops on PC

If the game stutters while your ping stays steady, it's your frame rate, not the network.

  • Cap your frame rate at what your PC holds in busy fights.
  • Lower effects and shadows first, and turn on upscaling if your GPU struggles.
  • Update your GPU driver and close background apps.
  • Turn off overlays you don't use, including the Steam overlay, if you see hitches or crashes.

Still unsure? See input lag.

Repair the install if problems started suddenly

If Marathon was fine and started lagging, hitching or disconnecting after an update while other games run normally, the install may be damaged:

  • Steam: right-click Marathon → Properties → Installed Files → Verify integrity of game files.
  • PS5 and Xbox: fully restart the console (not rest mode), and check for a pending game update.
  • Graphics driver: if the problem started after a driver update, try a clean install of the current version.

Then restart your router as well, so you test with a clean connection.

Lag after updates and at season start

New seasons and big patches bring the most players back at once, and they also change the game. Expect some server-side lag in the first hours, and on PC, the first matches after an update can hitch while shaders rebuild. If lag starts right after a patch, check @BNGServerStatus and Bungie's known issues before you start changing your setup; if it's a known problem, the fix is on Bungie's side.

On PS5 and Xbox

  • Use a cable, and pause downloads in the background.
  • Check NAT type in the console's network settings, and use UPnP on your router if you can.
  • Set Connection Quality the same way as on PC.

More: how to lower ping on PS5 and Xbox.

When a booster helps

Marathon has no server picker, so a ping booster can't move you to a different data centre. What it can do is improve the route between your ISP and the data centre you're placed on. That's useful when your home network is clean, Connection Quality is set to local and ping or loss is still bad, especially in the evening. ExitLag and GearUP support Marathon; test a free trial at the same time of day you normally play.

Quick diagnosis

Symptom Likely cause Fix
Everyone lags, disconnects Servers Check @BNGServerStatus, wait
Steady high ping, often far region Matchmaking expanding Connection Quality: prioritise local
High ping only in a crew Leader's setting Crew leader changes Connection Quality
Spikes and loss Wi-Fi, hotspot or busy network Ethernet, pause downloads, SQM
Party or join problems NAT UPnP or port forwarding, not both
Only you lag, evenings, clean network ISP or route pathping, booster trial

Other extraction shooters have similar problems: see ARC Raiders lag. For lag that snaps you back, see rubber-banding explained. The best boosters for this game are on the Marathon page.

FAQ

Why is Marathon so laggy?

Marathon lag usually comes from being matched on a far-away data centre (common in regions with fewer players), from your own connection (Wi-Fi, a mobile hotspot, packet loss or other traffic), or from server issues during busy periods and updates. Setting Connection Quality to prioritise local matches and playing on a wired connection fix most cases.

Can you choose a server in Marathon?

No. Bungie has said there's no in-game option to pick or lock specific servers: matchmaking places you on the best available data centre. What you can do is set Connection Quality to prioritise local matches, which makes matchmaking wait longer for a nearby server before it looks further away.

How do I fix high ping in Marathon?

Set Connection Quality to prioritise local matches, play on Ethernet instead of Wi-Fi or a mobile hotspot, pause downloads and uploads, and enable UPnP or forward ports, but not both. In a crew, the leader's Connection Quality setting applies, so the leader should change it.

How do I check if Marathon servers are down?

Check Bungie's server status account on X (@BNGServerStatus) and the Marathon help site. If there's an incident or maintenance, lag and disconnects affect everyone and you can only wait.

Does Marathon show ping in game?

Marathon shows very little detailed connection information in game, so test your line separately: run ping or pathping while you play, or use a ping booster's overlay to see live ping and packet loss.

ExitLag promo codes & deals

Free trial

ExitLag free trialVerified

Test ExitLag on your own games before paying. No code needed — activate the trial from the official site.

CodeNo code needed — the offer applies automatically
Get deal →
40% OFF

ExitLag discount codeUnverified

Public code reported to give up to 40% off. Enter it in the coupon field on the ExitLag checkout page.

CodeSPECIALOFFER
Get deal →

All ExitLag codes & deals →

GearUP Booster promo codes & deals

Free trial

GearUP Booster free trialVerified

Try GearUP on PC or mobile before choosing a plan. No code required.

CodeNo code needed — the offer applies automatically
Get deal →
20% OFF

GearUP Booster discount codeUnverified

Public code reported to give 20% off GearUP plans. Enter it in the redeem / coupon field at purchase.

CodeLUCKYRO
Get deal →

All GearUP Booster codes & deals →

Full Marathon guide: best ping booster for Marathon.

Ready to lower your ping? Grab an ExitLag discount or compare alternatives.

ExitLag promo codeAlternatives

More articles