Home › Blog › Double NAT: What It Is, How to Detect It and How to Fix It for Gaming

Double NAT: What It Is, How to Detect It and How to Fix It for Gaming

Double NAT happens when two routers both translate your connection. Learn how to spot it (WAN IP check, traceroute, Xbox warning), what it breaks in games, and the three fixes: bridge mode, access point mode or DMZ to your router.

ExplainersBy PingDeals Editorial TeamOctober 22, 20265 min read
Hand holding an Xbox controller in front of a screen

Double NAT means two routers in a row are both translating your internet connection, typically the modem-router your ISP gave you and a second router or mesh system you plugged in behind it. Browsing, streaming and most online matches work fine. What breaks is anything that needs other players to reach you: your NAT type drops to Strict or Moderate, UPnP stops working, party chat fails with some friends and hosting lobbies gets unreliable. The fix is to let only one device do the routing.

What double NAT looks like

Internet
 └ ISP router (NAT #1): public IP
    └ your router (NAT #2): 192.168.0.x
       └ PC / console: 192.168.1.x

Your ISP gives you one public IP address. The first router translates it into private addresses for everything plugged into it, including your second router. The second router then translates again for the devices behind it. Outgoing connections still work, because each router remembers what it sent out. Incoming connections have to find their way through two translation tables, and a port opened on one router means nothing to the other.

The most common setups that create it:

  • Your own gaming router connected to the ISP's router, both in router mode.
  • A mesh Wi-Fi system (Eero, Deco, Orbi, Google/Nest and others) in its default router mode behind the ISP router.
  • A fibre ONT plus ISP router plus your router, where the ISP router was left in place "just in case".
  • Powerline or extender kits don't cause it on their own; they are bridges, not routers.

How to detect double NAT

1. Check your router's WAN IP

Log in to the router your PC or console connects to (often at 192.168.0.1, 192.168.1.1 or 10.0.0.1, or through its app) and find the WAN or Internet IP on the status page.

WAN IP starts with What it means
A normal public address Only one NAT at home. No double NAT.
192.168. / 10. / 172.16.–172.31. Private address: another router is in front of yours. Double NAT.
100.64. to 100.127. Carrier-grade NAT at your ISP (CGNAT), see below.

2. Run a traceroute

On Windows, open Command Prompt and run tracert 8.8.8.8. On a Mac, use traceroute 8.8.8.8 in Terminal. If the first two hops are both private addresses (for example 192.168.1.1 and then 192.168.0.1), your traffic is going through two routers.

3. Look at what the console says

  • Xbox: Settings → General → Network settings → Test NAT type. It names double NAT directly when it finds it.
  • PlayStation: a Type 3 NAT result, together with a private WAN IP on your router, almost always means double NAT.
  • Nintendo Switch: System Settings → Internet → Test Connection. NAT type C, D or F points the same way.

What double NAT breaks (and what it doesn't)

Affected Not affected
NAT type (Strict / Type 3 / C–F) Your ping to game servers, in any meaningful way
UPnP: games can't open ports automatically Download speed
Party and voice chat with some friends Browsing, streaming, video calls
Hosting lobbies and peer-to-peer matches Matches on dedicated servers, for the most part
Port forwarding for game servers you host

A second router adds a fraction of a millisecond, so double NAT is not the reason your ping is high. If lag is your problem, start with why your ping is so high instead.

How to fix double NAT

Pick one of these. All of them leave a single device doing NAT.

Fix 1: Put the ISP device in bridge mode (best)

Bridge mode (sometimes called modem mode, modem only or IP passthrough) turns the ISP router into a plain modem and hands the public IP straight to your own router. Your router then does all the routing, with UPnP, port forwarding and Wi-Fi under your control.

  1. Find the bridge or modem mode setting in the ISP router's admin page, or ask the ISP to enable it.
  2. Restart both devices, ISP device first.
  3. Check that your own router's WAN IP is now a public address.

Some ISP routers handle TV or phone services and lose them in bridge mode. Check first if you use those.

Fix 2: Put your own router or mesh in access point mode

If you can't bridge the ISP device, do the opposite: switch your own router or mesh system to access point, bridge or AP mode. It stops routing and just provides Wi-Fi and Ethernet ports, while the ISP router does NAT, UPnP and port forwarding. This is often the easiest fix for mesh systems, at the cost of some of their features.

Fix 3: DMZ your router in the ISP router

If neither device has a usable bridge or AP mode, log in to the ISP router and set your own router's IP as the DMZ host (also called exposed host). All unsolicited incoming traffic is then sent to your router, which still has its own firewall, so it behaves almost like a single NAT. Then enable UPnP on your own router.

DMZ to a router is a reasonable workaround. DMZ to a PC is not: it removes the protection in front of that computer.

What doesn't fix it

  • Forwarding ports on only one router. You'd have to forward the same ports on both, pointing the first router at the second.
  • Turning UPnP on in both routers. UPnP opens ports on the router it talks to, which is usually only the inner one.
  • Changing DNS. DNS has nothing to do with NAT.

Double NAT vs CGNAT

If your router's WAN IP starts with 100.64 to 100.127, or doesn't match the address that "what is my IP" sites show even though you have only one router, your ISP is using carrier-grade NAT: one public IP shared between many customers. That's a double NAT you can't fix at home. Ask your ISP for a public IPv4 address (some give it free, some charge a small fee), or check whether IPv6 is available, which avoids NAT for games and platforms that support it.

After the fix

  1. Restart the console or PC and run the NAT test again: you should see Open / Type 2 / A or B.
  2. Make sure UPnP is on in the router that now does the routing. More on that in router settings for gaming.
  3. If you still get Strict, forward the ports manually: port forwarding for gaming. On Xbox there's a dedicated walkthrough: Xbox NAT type strict.

For the bigger picture of what Open, Moderate and Strict mean on each platform, see NAT type explained. And if your NAT is open but games still lag, the problem is the route to the server, not NAT: that's where a ping booster can help, and the ExitLag promo code page lists current deals and free trials.

Cover photo: Matej / StockSnap (CC0)

FAQ

What is double NAT?

Double NAT means your traffic passes through two devices that both do network address translation, usually your ISP's modem-router and your own router (or a mesh system) plugged in behind it. Each one hides the devices behind it, so incoming game connections have to get through two layers instead of one.

Does double NAT affect gaming?

It rarely changes ping, but it often causes a Strict or Moderate NAT type, UPnP that doesn't work, party chat that fails with some friends, long matchmaking and trouble hosting lobbies in peer-to-peer games.

How do I know if I have double NAT?

Open your own router's status page and look at its WAN (internet) IP address. If it starts with 192.168, 10 or 172.16–172.31, it's a private address, which means another router sits in front of yours. Xbox consoles also show a "Double NAT detected" warning in the network test.

Is double NAT bad?

It isn't dangerous and many people never notice it. It only matters when something needs incoming connections: console party chat, peer-to-peer games, hosting a game server or remote access. For those, fixing it is worth the ten minutes.

Is double NAT the same as CGNAT?

No. Double NAT happens inside your home and you can fix it. CGNAT (carrier-grade NAT) happens at your ISP, which shares one public IP between many customers. If your router's WAN IP starts with 100.64 to 100.127, you're behind CGNAT and need to ask your ISP for a public IP.

ExitLag promo codes & deals

Free trial

ExitLag free trialVerified

Test ExitLag on your own games before paying. No code needed — activate the trial from the official site.

CodeNo code needed — the offer applies automatically
Get deal →
40% OFF

ExitLag discount codeUnverified

Public code reported to give up to 40% off. Enter it in the coupon field on the ExitLag checkout page.

CodeSPECIALOFFER
Get deal →

All ExitLag codes & deals →

Ready to lower your ping? Grab an ExitLag discount or compare alternatives.

ExitLag promo codeAlternatives

More articles